Error display. Check the table below for each error code and the corresponding cause and solution.
| Display | Possible Causes and Solutions |
| F1 The power station will automatically shut down. | Indicates battery pack(s) is/are flat. Charge the battery pack(s) and restart the power station. |
| F2 The power station will automatically shut down. | Indicates the power station is overheated. Wait for the power station to cool down and restart. |
| F3 The power station will automatically shut down. | The power station may be overloaded. Wait for one minute and try restart the power station. If the situation continues, remove some connected appliances and restart. |