Ready to assemble your Sun Joe 24V-X2-TLR14? Use the official assembly video below to follow the setup process, and refer to your operator’s manual for model-specific diagrams and safety instructions.
Watch the Assembly Video
Follow along with the 24V-X2-TLR14 assembly walkthrough.
Video not playing? Watch on YouTube.
Before You Begin
- Remove the product and accessories from the packaging and check for missing or damaged parts against the packing list in your operator’s manual.
- Place the components on a clean, level surface with enough space to work safely.
- Keep the batteries removed during assembly and adjustments.
- Review all assembly diagrams, warnings, and battery-charging instructions in the operator’s manual before proceeding.
Assemble Your 24V-X2-TLR14
-
Identify the Components
Compare the parts in the carton with the components shown in the assembly video and your operator’s manual.
-
Follow the Video Walkthrough
Use the video above to complete the assembly sequence. Pause at each stage to verify the orientation and fit of each component against the manual’s illustrations. Do not force any parts together.
-
Secure All Connections
Confirm that all assembled connections, locks, and fasteners shown in the video and manual are fully engaged and secure.
-
Prepare the Batteries
Follow the operator’s manual and charger instructions to charge the compatible batteries. Do not install the batteries until assembly is complete and you are ready to operate the tool.
Final Assembly Check
Before use, inspect the assembled tool for loose parts or visible damage, ensure guards and handles are correctly secured, and confirm the work area is clear. Always follow the operating and safety instructions for 24V-X2-TLR14.
Need the Operator’s Manual?
Visit the Shop Joe Product Manuals page and search for 24V-X2-TLR14 to find the complete assembly illustrations, parts list, and safety information.
Need Help With Your 24V-X2-TLR14?
For questions about assembly or missing or damaged components, contact Shop Joe Customer Care.