Use this guide to identify the correct replacement high-pressure hose for a compatible Sun Joe pressure washer. Match the complete pressure-washer model number and connection style before ordering—hoses that look similar may use different fittings.
How to Use This Guide
-
Find the Pressure-Washer Model Number
Use the complete model number shown on the product label. Include every suffix, such as -MAX, -XT, -PRO, -RM, or a bundle suffix.
-
Locate the Model Below
Find the exact pressure-washer model under a hose part number. Do not select a hose based only on its length, color, or appearance.
-
Compare the Connection Style
Confirm that the unit outlet and trigger-gun connections match the listed fittings. A hose with two M22 connections is not interchangeable with a hose using a quick-connect plug on one end.
-
Confirm Before Ordering
If the exact model is not listed, or the original fittings do not match the description, contact Shop Joe Customer Support before purchasing or installing a hose.
Compatible Hoses and Models
SPX6001C-HOSE High-Pressure Hose
PART: SPX6001C-HOSE
| Compatible trigger gun | SPX6001C-GUN |
|---|---|
| Compatible spray wand | SPX2598MAX-WAND |
This precision-fit hose is compatible only with the following SPX6000C and SPX6001C series pressure washers:
SPX3000-33 High-Pressure Hose
PART: SPX3000-33
| Length | 20 ft |
|---|---|
| Diameter | 1/4 in |
| Fittings | M22 female quick-screw fittings on both ends |
| Compatible trigger gun | SPX3000-31 |
| Compatible spray wand | SPX3000-41 |
Compatible pressure-washer models:
SPX3001-36 Replacement High-Pressure Hose
PART: SPX3001-36
| Small end | 1/4 in quick-connect plug |
|---|---|
| Large end | M22-15 mm fitting |
| Compatible trigger gun | SPX3000-31 |
| Compatible spray wand | SPX3000-41 |
Compatible pressure-washer models:
SPX2000-20 High-Pressure Hose
PART: SPX2000-20
| Connection | Inner Diameter | Outer Diameter | Cross Section |
|---|---|---|---|
| Small end | 5 mm | 8 mm | 1.5 mm |
| Large end | 14.5 mm | 15 mm | 2.5 mm |
| Compatible trigger guns | SPX2598MAX-GUN; SPX2000-21 |
|---|---|
| Compatible spray wands | SPX2598MAX-WAND; SPX2000-HP |
Compatible pressure-washer models:
SPX1000-16 High-Pressure Hose
PART: SPX1000-16
| Gun connection | 1/4 in quick-connect plug |
|---|---|
| Unit outlet connection | M22-15 mm fitting |
| Compatible trigger guns | SPX2598MAX-GUN; SPX1000-22 |
| Compatible spray wands | SPX2598MAX-WAND; SPX2000-HP |
Compatible pressure-washer models:
SPX200-GO Alternative Replacement Parts
MODEL: SPX200-GO
The following alternative replacement parts may be used with the Sun Joe SPX200-GO.
| Alternative high-pressure hose | SPX1000-16 |
|---|---|
| Alternative trigger gun | SPX3000-31 |
| High-pressure water outlet | Front of the unit |
| Garden-hose water inlet | Back of the unit; uses SPX-AGHA |
Before ordering: Confirm the model number and connection style on your pressure washer to ensure the replacement part is compatible.
SPX-25HD Alternative Pressure-Washer Hose
PART: SPX-25HD
| Length | 25 ft |
|---|---|
| Diameter | 1/4 in |
| Fittings | M22 female quick-screw fittings on both ends |
| Connection reference | Same thread and connection style as SPX3000-33 |
Installation requirement: The brass male adapter must be removed with pliers before the hose can be connected. Complete this only after turning the pressure washer off, unplugging it, shutting off the water, and releasing all trapped pressure. If the adapter cannot be removed without excessive force or the fitting appears damaged, stop and contact support.
Before Installing a Replacement Hose
- Compare the new hose part number with the exact pressure-washer model in this guide.
- Inspect the hose, fittings, threads, quick-connect plug, seals, trigger gun, and pressure-washer outlet for damage.
- Do not force a fitting, cross-thread a connection, modify a hose, or combine unlisted adapters.
- Install the hose according to the pressure-washer manual and confirm every connection is fully secured.
- Turn on the water supply and check for leaks before powering the pressure washer.
- Stop using the unit if a hose or fitting leaks, separates, bulges, or cannot be secured.
Frequently Asked Questions
Can I select a replacement hose by length alone?
No. The hose must have the correct pressure-washer and trigger-gun connections. Match the exact model and fitting style even when two hoses have the same diameter or a similar length.
Are SPX3000-33 and SPX3001-36 interchangeable?
No. SPX3000-33 has M22 female quick-screw fittings on both ends. SPX3001-36 has a 1/4-inch quick-connect plug on one end and an M22-15 mm fitting on the other.
Can SPX-25HD be used with an SPX4003 series pressure washer?
No. SPX-25HD is specifically excluded from the SPX4003 series.
What should I do if my exact model is not listed?
Do not guess or force a connection. Contact Shop Joe Customer Support with the complete model number and photos of the existing hose fittings so compatibility can be confirmed.