The Sun Joe SPX-PWB1 Power Scrubbing Broom is a high-pressure, multi-purpose utility brush designed for sweeping and surface cleaning. It is compatible with SPX Series pressure washers, but the connection point can vary by pressure washer model.
Connection Video
Having trouble viewing the video? Watch the SPX-PWB1 connection video on YouTube.
Which Connection Does My Pressure Washer Use?
Compatibility note: Shop Joe currently identifies the SPX-PWB1 as compatible with all SPX Series pressure washers. The official product page also provides assembly video guidance for SPX1000, SPX1500, SPX2000, SPX2500, SPX6000C, SPX3000, SPX3001, SPX4000, and SPX4001 models.
Most SPX3000 + SPX4000 Series
Connection: Trigger gun → transfer adapter → SPX-PWB1 Power Scrubbing Broom.
-
Detach the Spray Wand
If it is still installed, detach the spray wand from the trigger gun.
-
Attach the Transfer Adapter
Attach the included transfer adapter to the trigger gun.
-
Align the Scrubbing Broom
Align the two tabs on the first piece of the scrubbing broom with the transfer adapter.
-
Connect the Scrubbing Broom
Push the top piece of the scrubbing broom into the transfer adapter, then twist it counterclockwise to lock it into place.
-
Secure the Locking Collar
Move the locking collar up and twist it to secure the scrubbing broom in place.
Direct-to-Trigger-Gun Models
This connection is identified in the official quick guide for: SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT, most SPX2000 Series, SPX4003-ELT, and SPX7001E.
-
Detach the Spray Wand
If it is still installed, detach the spray wand from the trigger gun.
-
Align the Scrubbing Broom
Align the two tabs on the first piece of the scrubbing broom directly with the trigger gun.
-
Connect the Scrubbing Broom
Push the top piece into the trigger gun and twist it counterclockwise to lock it into place.
-
Secure the Locking Collar
Move the locking collar up and twist it to secure the scrubbing broom in place.
SPX200 + SPX1000 Series
Connection: Trigger gun → middle wand → SPX-PWB1 Power Scrubbing Broom.
-
Leave the Middle Wand Attached
Disconnect the spray wand assembly so that only the middle wand remains attached to the trigger gun.
-
Align the Scrubbing Broom
Align the two tabs on the scrubbing broom with the middle wand.
-
Connect the Scrubbing Broom
Push the scrubbing broom into the middle wand and twist it counterclockwise to lock it into place.
-
Secure the Locking Collar
Move the locking collar up and twist it to secure the scrubbing broom in place.
What Is the SPX-PWB1 Designed For?
Connection Reference
Need Help Connecting Your SPX-PWB1?
If you cannot determine the correct connection for your pressure washer, the scrubbing broom will not lock securely into place, or your exact model is not shown in the written connection guide, contact Shop Joe Customer Support. Have the complete pressure washer model number available.