How do I connect my Power Scrubbing Broom model SPX-PWB1 to my Sun Joe Pressure Washer?

https://youtu.be/lDPisQ3tt5k 

Whether you're cleaning your driveway, deck, or patio, a scrubbing broom can be a helpful tool. But attaching it to your pressure washer can be tricky. That's why we've created these easy-to-follow instructions for all three of our scrubbing broom models.

For SPX3000/SPX4000/SPX9000 Series:

1. Detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Align the two tabs on the scrubbing broom with the transfer adapter.
4. Push the top piece of the scrubbing broom into the transfer adapter and twist it counterclockwise to lock it in place.
5. Use the locking collar to secure the scrubbing broom in place.

For SPX2000/SPX6000/SPX7000 Series:

1. Detach your spray wand from your trigger gun.
2. Align the two tabs on the scrubbing broom with the trigger gun.
3. Push the top piece of the scrubbing broom into the trigger gun and twist it counterclockwise to lock it in place.
4. Use the locking collar to secure the scrubbing broom in place.

For SPX200/SPX1000 Series:

1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.
2. Align the two tabs on the scrubbing broom with the middle wand.
3. Push the scrubbing broom into the middle wand and twist it counterclockwise to lock it in place.
4. Use the locking collar to secure the scrubbing broom in place.

We hope these instructions help!

If you have any other questions, please contact our customer service team at (866) SNOW-JOE. We're here to help!