Keep Your Devices Charged On the Go. The ATJ-CA100 Cordless Digital Inflator doubles as a 2000 mAh portable power bank for smartphones, tablets, speakers, and similar devices. This guide shows you how to use the power bank, how to recharge the inflator, and what to check if the battery isn’t charging.
Product Overview
Power Bank Output
Charge devices through the USB-A port (5V DC | 2A). Charging starts automatically as soon as a device is connected.
Charging Input
Recharge the inflator through the USB-C port (5V DC | 2A) using the included USB-A to USB-C cable.
Before You Begin
Before first use: The inflator ships with a low charge. Fully charge the battery before using it as a power bank or inflator.
The 12V DC plug does not charge the battery: The 12V DC auto power cable only powers the inflator while it’s plugged into your vehicle’s 12V socket. To charge the internal battery, always use the USB-A to USB-C cable.
How to Use the ATJ-CA100 as a Power Bank
- Check the battery level. Press and hold the power button until the LCD lights up. The battery level indicator uses three bars to show low, medium, and high charge. Recharge the inflator first if the battery is low.
- Connect your device. Plug your device’s USB charging cable into the inflator’s USB-A port.
- Let it charge. Charging starts automatically once your device is connected.
- Disconnect and recharge. Unplug your device when it’s done charging. Recharge the inflator promptly so it isn’t stored with a discharged battery.
Tip: The power bank uses the same battery as the inflator. Keep the battery charged so the inflator is ready when you need it on the road.
Charging the ATJ-CA100
- Connect the cable to the inflator. Plug the USB-C end of the included cable into the inflator’s USB-C port.
- Connect to a power source. Plug the USB-A end into a vehicle USB port or a USB wall adapter (not included). Computers and power banks can also be used. For faster charging, use a USB adapter rated at 10W or higher.
- Watch the battery level indicator. The bars cycle on from left to right while the battery is charging.
- Unplug when fully charged. When the bars stay steady, the battery is fully charged. Unplug the cable.
Charging reminder: The charger does not turn off automatically when the battery is full, so unplug the cable when charging is complete. Do not use the inflator while it’s charging. It’s normal for the inflator to feel slightly warm while charging.
Battery Level Indicator
| LCD Indicator | Meaning |
|---|---|
| Bars cycling on from left to right | The battery is charging. |
| Bars steady (not cycling) | The battery is fully charged. Unplug the USB cable. |
| Three bars (during use) | Represent low, medium, and high battery levels. |
Troubleshooting by Symptom
Select the issue you are experiencing to view the steps.
Shows It’s Charging, but the Battery Doesn’t Charge
Possible Causes
- The inflator is connected with the 12V DC auto power cable, which powers the inflator but does not charge the battery.
- The inflator is being charged outside the 41°F – 105°F (5°C – 40.5°C) range, such as outdoors in freezing weather.
- The inflator is being used while charging.
- The battery was fully discharged or stored discharged for a long period, which degrades battery life over time.
What to Do
- Use the USB cable. Charge with the included USB-A to USB-C cable connected to the USB-C port. The 12V DC cable will not charge the battery.
- Charge at room temperature. Move the inflator indoors and charge it between 41°F and 105°F (5°C and 40.5°C).
- Use a stronger power source. Connect to a USB adapter rated at 10W or higher for faster charging.
- Leave it idle while charging. Do not inflate or use the power bank while the inflator is charging.
- Check the indicator. Bars cycling left to right mean the battery is charging. Bars that stay steady mean it’s fully charged.
Still not charging? Stop using the inflator and contact Shop Joe Customer Support. Have your model number (ATJ-CA100) ready.
My Device Isn’t Charging from the Power Bank
- Check the inflator’s battery. Press and hold the power button until the LCD lights up and check the battery level. Recharge the inflator if the battery is low.
- Use the USB-A port. Connect your device’s USB charging cable to the inflator’s USB-A port.
- Let it start. Charging starts automatically once your device is connected.
The Display Turned Off
This is normal. The LCD turns off automatically after 150 seconds or more of non-use. Press and hold the power button until the LCD lights up again.
Important Battery Care + Storage Reminder
- Never store the inflator with a discharged battery. Recharge it right after it runs down.
- Do not let the battery fully discharge, as this degrades battery life over time.
- During long storage periods, recharge the battery every 6 months.
- Store and charge the inflator in a cool area. Temperatures above or below normal room temperature shorten battery life.
- Avoid excessive, continuous use of the ON/OFF button, which can permanently damage the lithium-ion battery.
- Unplug the charging cable when the inflator won’t be used for a long time.
- Keep the inflator in the included storage bag, away from hot surfaces and direct sunlight.
Power Bank Specifications
| Specification | Details |
|---|---|
| Model | ATJ-CA100 |
| Battery capacity | 2000 mAh |
| Power bank output | 5V DC | 2A (USB-A port) |
| Charging input | 5V DC | 2A (USB-C port) |
| 12V DC plug | Provides working power to the inflator only. It does not charge the internal battery. |
| Charging cable | USB-A to USB-C cable (included) |
| Charging temperature | 41°F – 105°F (5°C – 40.5°C) |
| Product Manual | ATJ-CA100 Operator’s Manual |
| Warranty | 2-year limited warranty; terms and exclusions apply. |
Common Questions
What can I charge with the ATJ-CA100?
You can charge smartphones, tablets, speakers, and similar devices through the USB-A port.
Can I charge the inflator with the 12V car cable?
No. The 12V DC auto power cable only powers the inflator while it’s plugged into your vehicle’s 12V socket. Use the included USB-A to USB-C cable to charge the battery.
How do I know the battery is fully charged?
While charging, the battery level bars on the LCD cycle on from left to right. When the bars stay steady, the battery is fully charged and you can unplug the cable.
Can I use the inflator while it’s charging?
No. Do not use the inflator while it’s charging.
Why is my inflator showing it’s charging but the battery won’t charge?
Make sure you are charging with the USB-A to USB-C cable, not the 12V DC cable, and that you are charging indoors between 41°F and 105°F (5°C and 40.5°C). See Shows It’s Charging, but the Battery Doesn’t Charge for all the steps.
Need More Help?
If the issue continues after completing the correct troubleshooting section, contact Shop Joe Customer Support.