The Sun Joe 24V-BBQ-LTE Cordless Fire Starter uses a Sun Joe 24V iON+ lithium-ion battery and compatible 24V charging equipment.
Use the guide below to identify the battery and charger, charge the battery correctly, and understand which charger to use if you have an older plug-in charger.
Fire Starter Battery + Charger
Battery
24VBAT-LTE
The 24V-BBQ-LTE operator's manual identifies 24VBAT-LTE as the included 24V iON+ lithium-ion battery.
Plug-In Charger
24VCHRG-AC
The Fire Starter operator's manual identifies 24VCHRG-AC as the plug-in charger supplied with the 24V-BBQ-LTE kit.
Quick Charger
24VCHRG-QC
The operator's manual lists 24VCHRG-QC as an approved 24V iON+ lithium-ion quick charger.
Which Charger Should I Use?
| Charger | Guidance |
|---|---|
| 24VCHRG-AC | This is the plug-in charger identified in the 24V-BBQ-LTE Fire Starter operator's manual. |
| 24VCHRG-QC | This 24V quick charger is listed as an approved accessory for the Fire Starter battery. |
| ICHRG24-AC | This is an older plug-in charger. Newer 24V batteries have smaller charger entry points, so this charger may not fit. The approved support guidance recommends 24VCHRG-QC for newer 24V batteries. |
Do not force a charger plug into the battery.
If an older ICHRG24-AC charger does not fit the battery's charging entry point, use the recommended 24VCHRG-QC charger instead.
How to Charge the Fire Starter Battery
-
Remove the Battery from the Fire Starter
Remove the battery from the Fire Starter before charging.
-
Check the Battery Charge Level
Use the battery indicator lights to determine the battery's current charge level.
-
Check the Charger Power Supply
Make sure the electrical supply matches the voltage shown on the charger's rating plate before plugging in the charger.
-
Connect the Approved Charger
Connect the compatible Sun Joe 24V charger to the battery according to the charger and battery connection provided for your model.
-
Allow the Battery to Charge
Leave the battery connected to the compatible charger until the battery reaches the desired charge level.
The 24VBAT-LTE battery does not need to be completely discharged before it is charged.
The operator's manual states that the battery can be topped off before or after extended use.
Charger Safety
- Recharge the battery only with a charger specified for the battery system.
- Remove the battery from the Fire Starter before charging.
- Do not use a charger with a damaged cord or plug.
- Keep the charger away from moisture and rain.
- Keep the charger cord away from heat, oil, and sharp edges.
- Unplug the charger when it is not in use.
- Use only recommended batteries, chargers, attachments, and accessories.
Do not use an incompatible battery charger.
A charger intended for a different battery type can create a risk of fire or injury.
About Older ICHRG24-AC Chargers
Some customers may have an older ICHRG24-AC plug-in charger.
Newer 24V batteries have smaller entry points for plug-in chargers. Because of this, the older ICHRG24-AC may not fit a newer battery.
If the older charger does not fit, the approved support guidance recommends the 24VCHRG-QC, which is designed for the 24V battery series.
ICHRG24-AC and 24VCHRG-AC are different charger model numbers.
The older-charger guidance specifically refers to ICHRG24-AC. The 24V-BBQ-LTE Fire Starter manual identifies 24VCHRG-AC as its plug-in charger.
Frequently Asked Questions
What battery does the 24V-BBQ-LTE Fire Starter use?
The operator's manual identifies 24VBAT-LTE as the included 24V iON+ lithium-ion battery.
What charger comes with the 24V-BBQ-LTE Fire Starter?
The operator's manual identifies 24VCHRG-AC as the included plug-in charger.
Can I use the 24VCHRG-QC quick charger?
Yes. The Fire Starter operator's manual lists 24VCHRG-QC as an approved 24V iON+ lithium-ion quick charger.
Will my old ICHRG24-AC charger work with a newer battery?
It may not fit. Newer 24V batteries have smaller plug-in charger entry points.
The approved guidance recommends 24VCHRG-QC for newer 24V batteries.
Do I need to completely drain the battery before charging it?
No. The 24VBAT-LTE battery does not need to be completely discharged before charging and can be topped off as needed.
Should I charge the battery while it is installed in the Fire Starter?
No. Remove the battery from the Fire Starter before charging.
Find Your Fire Starter
Visit the Shop Joe Fire Starter Page to locate your product and review its approved product information.
Always check the model number printed on your battery and charger before connecting them.
If you are unsure which charger is correct for your Fire Starter battery, Shop Joe Customer Care can help confirm the correct charger for your battery.