How do I assemble my RJ208M Roof Rake?

1. Connect right and left frames to the handle frame adapter. Depress the small buttons at the end of the frames to fit the frames in the adapter. Make sure the small buttons pop up in the holes on the adapter so the assembly is secured
2. Insert the flat ends of the left and right frame into the grooves on the connectors next to wheels on the slide assembly. Push firmly to secure
3. To connect the roof rake head with the pole handle, depress the small button at the end of the roof rake head assembly and insert into the pole handle. Make sure the small button pops up in the hole on the pole handle so the assembly is secured
4. If additional reach is needed, attach the provided pole extensions between the pole handle and the rake head assembly. Use the included pole couplers to connect pole extensions

NOTE: Make sure the pole handle is the last piece of the assembly.

NOTE: Make sure the small buttons pop up in the hole on the pole so the assembly is secured.