Proper end-of-season storage helps prevent a frozen auger or impeller, corrosion, battery damage, and unexpected startup problems when winter returns. Use this guide for Snow Joe cordless snow blowers, then check the operator’s manual for your exact model and battery platform.

Models Covered

This guide covers the cordless snow-blower models currently listed in the Shop Joe Snow Blowers collection, including bundles that contain one of these units.

Not covered: Corded snow blowers, cordless snow shovels, covers, clean-out tools, and other standalone accessories have different requirements. If your model is not listed, use the storage section in its exact manual.

Before You Begin

• Choose a dry indoor storage area that can be locked and kept out of children’s reach.
• Keep the correct operator’s manual available for your model.
• Allow batteries to cool to room temperature before charging or storing them.
• Do not begin cleaning or inspection until the machine is off, all moving parts have stopped, and every battery is removed.

Store the Snow Blower

1. Run the Auger or Impeller Briefly

   After the final snow-clearing pass, keep the machine outdoors and run it for a few minutes to help prevent the auger, collector, or impeller from freezing. Stop the machine and wait for every moving part to come to a complete stop.

2. Power Down and Remove Every Battery

   Turn the machine off, remove the safety key when the model uses one, and remove all battery packs. A two-battery model requires both packs removed; the 96V-Q4-SB24 requires all four.

3. Remove Snow and Ice Safely

   Use the clean-out tool or a suitable brush to remove remaining snow. Wipe the housing, handles, chute, and battery compartments dry. On models with a chute crank or deflector control, move it through its normal range to release trapped snow.

4. Inspect the Machine

   Check for loose fasteners, worn or damaged belts, damaged scraper bars, cracked housings, damaged battery compartments, loose handles, unreadable labels, and other visible damage. Do not operate or store the blower as ready for use if a safety-related defect is found.

5. Prepare for Transport if Needed

   Secure the machine so it cannot tip, roll, or shift. Transport batteries separately from the blower, protected from moisture, impact, metal objects, and extreme temperatures.

6. Store the Unit Indoors

   Place the clean, dry snow blower in a locked, dry indoor location away from children, moisture, corrosive chemicals, and unauthorized use. Follow the manual before folding or changing the handle position.

7. Preserve Labels and Records

   Keep safety and instruction labels readable. Record the model and serial numbers and retain the operator’s manual for future maintenance or support.

Store 24V IONMAX Batteries and Chargers

Use these steps for 24V-X2 models and for all four 24V packs used by the 96V-Q4-SB24.

1. Disconnect the Charger

   Remove every battery from the machine and charger, then unplug the charger. Do not leave packs installed or connected during off-season storage.

2. Inspect and Dry the Components

   Do not store a battery or charger that is wet, cracked, swollen, leaking, unusually hot, or otherwise damaged. Never use oil or solvents on the battery casing.

3. Choose a Dry, Temperature-Controlled Location

   Store the packs and charger at room temperature, away from moisture, direct sunlight, heat sources, vehicles, and metal buildings that become hot. Prolonged storage above 120°F (49°C) can permanently reduce battery capacity.

4. Maintain the Off-Season Charge

   For the covered 24V IONMAX examples, recharge every six months to approximately 50% capacity, shown as two charge-indicator lights. Check each pack individually and use only its compatible charger.

5. Protect the Terminals

   Keep terminals clean and away from keys, coins, fasteners, tools, or other metal objects that could cause a short circuit.

Store 100V iONPRO Batteries and Chargers

1. Remove and Unplug

   Remove the 100V battery from the blower and charger, then unplug the charger.

2. Store Cool and Dry

   Keep the battery and charger in a cool, dry location. The iON100V example recommends an ideal temperature near 59°F (15°C), away from direct sunlight and locations above 104°F (40°C).

3. Maintain at Least 40% Charge

   Store the battery at a charge level of at least 40%. Follow the exact 100V battery and charger manual for recharge intervals and indicator behavior rather than applying the 24V two-light rule.

4. Prevent Freezing and Deep Discharge

   Do not store the battery where it can freeze or remain deeply discharged. Recharge it only at room temperature and never use a damaged pack.

Safety Stop Conditions

Preseason Readiness Check

1. Inspect Before Installation

   Check the blower, battery compartments, packs, chargers, cables, fasteners, controls, chute, scraper, auger or impeller, and safety labels for damage.

2. Charge at Room Temperature

   Use only the charger specified for the battery platform. Allow cold packs to reach room temperature before charging.

3. Install the Complete Battery Set

   Install the number and type of batteries required by the exact model. For multi-battery machines, use compatible packs with similar charge levels as directed by the manual.

4. Test in a Clear Outdoor Area

   Confirm the controls, lights, auger or impeller, chute controls, and drive system operate normally before the first snowfall. Keep people, pets, and loose objects away.

Quick Troubleshooting Checks

Escalation Path

Contact Shop Joe support when:

• The unit has worn, loose, damaged, or missing safety-related parts.
• The auger or impeller remains locked after visible snow and ice are safely removed.
• A compatible battery or charger still fails after the basic checks above.
• The machine vibrates abnormally, produces unusual noise or odor, or repeatedly shuts down.
• You are unsure which battery, charger, manual, or storage rule applies to the model.

Have the model number, serial number, date code, battery and charger model numbers, purchase details, and a clear description of the issue ready. Call 1-866-225-9723 or use the support options available on Shop Joe.

Frequently Asked Questions