Before storing your Sun Joe battery-operated blower + vacuum for an extended period or for the season, inspect the tool, remove the battery or batteries, and store the equipment indoors in a clean, dry location.
Article scope: This guide applies to Sun Joe battery-operated blower + vacuum models, including 24V IONMAX workshop blower/vacuums and cordless blower + vacuum + mulcher models. Always check the operator's manual for your exact model.
How to Prepare Your Blower + Vacuum for Storage
-
Inspect the Tool
Examine the cordless blower + vacuum thoroughly for worn, loose, or damaged parts.
Do not continue using the tool if a component is damaged and requires repair or replacement.
-
Remove the Battery or Batteries
Remove the battery pack or battery packs from the blower + vacuum before storing the machine.
Models such as the 24V-WSB use one 24V IONMAX battery, while models such as the 24V-X2-BVM143 and 24V-X2-BVM190 use two 24V IONMAX batteries.
-
Empty the Collection Bag
On models equipped with a collection bag, empty the bag after use.
The blower + vacuum + mulcher manuals note that leaving debris in the bag can contribute to deterioration and restrict airflow.
-
Remove Dirt + Debris
Keep the air vents clear and remove accumulated dust and dirt from the tool.
The 24V-WSB manual recommends cleaning with a rag or brush.
-
Store the Tool Indoors
Store the blower + vacuum in a clean, dry indoor location.
For the 24V-WSB series, the manual specifies a dry, well-ventilated place.
-
Keep It Secure
Keep the blower + vacuum, batteries, and charger in a location that is inaccessible to children.
The 24V-X2 blower + vacuum + mulcher manuals additionally specify a locked location away from children and animals.
-
Keep the Tool Away from Corrosive Agents
For models such as the 24V-WSB, the operator's manual specifically instructs users to keep the stored tool away from corrosive agents.
Collection Bag Care
For cordless blower + vacuum + mulcher models equipped with a collection bag, empty the bag after each use.
The 24V-X2-BVM143 manual also instructs users to wash the collection bag once a year, or more often if needed.
How to Clean the Collection Bag
-
Remove the Bag
Remove the collection bag from the blower + vacuum + mulcher.
-
Turn the Bag Inside Out
Turn the collection bag inside out.
-
Hang the Bag
Hang the bag in preparation for cleaning.
-
Rinse It Thoroughly
Hose the collection bag down thoroughly.
-
Allow It to Dry
Leave the bag hanging until it is dry.
-
Return It to Its Normal Position
Once dry, turn the collection bag right-side out before reinstalling or storing it.
How Should I Store the Batteries + Charger?
Remove the IONMAX battery pack or battery packs from the tool before storage.
The 24V-X2-BVM143 and 24V-X2-BVM190 manuals instruct users to store the batteries, charger, and cordless blower + vacuum + mulcher indoors in a clean, dry, locked location that is out of the reach of children and animals.
Do not expose the batteries or charger to rain or wet conditions. Follow the charging and battery-safety instructions in the operator's manual for your exact model.
Winterization Reminder
These cordless blower + vacuum models are battery-operated, so the official manuals do not call for gasoline, fuel stabilizer, engine oil changes, or other gas-engine winterization procedures.
Seasonal storage focuses on removing the battery or batteries, inspecting and cleaning the tool, emptying the collection bag where applicable, and storing the equipment indoors in a clean, dry, secure location.
Check Your Exact Model
Battery quantity and blower/vacuum configuration vary by model:
- 24V-WSB-LTE: 24V IONMAX workshop blower + vacuum using one removable 24V battery.
- 24V-X2-BVM143: cordless blower + vacuum + mulcher powered by two 24V IONMAX batteries.
- 24V-X2-BVM190: cordless blower + vacuum + mulcher powered by two 24V IONMAX batteries.
For the storage and battery instructions specific to your blower + vacuum, use the complete model number from the product label.
Check Your Product Manual
For complete storage, battery, collection-bag, maintenance, and safety instructions, visit the Shop Joe Product Manuals page and search using your complete model number.
Need Help Preparing Your Blower + Vacuum for Storage?
If you find worn, loose, or damaged parts while preparing the unit for storage, or need help identifying the correct storage guidance for your model, contact Shop Joe Customer Support. Have your complete model number and serial number available.