| Model Number | Step-by-Step: How to ATTACH / INSTALL the Crank Rod | Step-by-Step: How to REMOVE / DETACH the Crank Rod |
| 24V-X2-SB18-TV1, 24V-X2-SB18 | Slide upper chute crank through the rubber ring Remove the hitch pin from the female end of the lower chute crank Insert the lower chute crank into the housing Align the holes Secure with a hitch pin Remove the second hitch pin from the lower chute crank Insert the upper chute crank into the lower chute crank Align the holes on both crank sections Secure with the final hitch pin |
Removal Steps
Turn OFF the snow blower and remove both batteries Remove the hitch pin connecting the upper and lower chute cranks Pull the upper chute crank upward Remove the hitch pin securing the lower chute crank to the housing Pull the lower chute crank out of the housing opening
|
| 24V-X2-SB22 | Remove the hitch pin from the female end of the lower chute crank Insert the lower chute crank into the opening at the back of the housing Align the holes in the crank rod and housing Secure the lower chute crank with a hitch pin Remove the second hitch pin from the lower chute crank Slide the upper chute crank through the rubber ring on the middle frame Insert the upper chute crank into the lower chute crank Align the holes and secure with the final hitch pin
| Removal Steps Turn OFF the snow blower and remove both batteries Remove the hitch pin connecting the upper and lower chute cranks Pull the upper chute crank upward Remove the hitch pin securing the lower chute crank to the housing Pull the lower chute crank out of the rear housing opening
|
| 24V-X2-SB18-XR | Remove the hitch pin from the female end of the lower chute crank Insert the lower chute crank into the opening at the back of the housing Align the holes in the crank rod and housing Secure the lower chute crank with a hitch pin Remove the second hitch pin from the lower chute crank Slide the upper chute crank through the rubber ring on the middle frame Insert the upper chute crank into the lower chute crank Align the holes and secure with the final hitch pin
| Removal Steps Turn OFF the snow blower and remove both batteries Remove the hitch pin connecting the upper and lower chute cranks Pull the upper chute crank upward Remove the hitch pin securing the lower chute crank to the housing Pull the lower chute crank out of the rear housing opening
|
| SJ627E-CVR | Remove the hitch pin from the female end of the lower chute crank. Insert the lower chute crank into the opening at the back of the snow thrower housing.
Make sure the holes are aligned. Secure the lower chute crank by reinserting the hitch pin through the aligned holes. Remove the second hitch pin from the top end of the lower chute crank. Slide the upper chute crank down through the rubber ring located on the middle frame. Insert the upper chute crank into the lower chute crank. Align the holes on both crank sections and secure them with the hitch pin.
| Steps Remove the hitch pin that connects the upper chute crank to the lower chute crank. Pull the upper chute crank upward, sliding it out of the lower crank and rubber ring. Remove the hitch pin securing the lower chute crank at the rear housing. Pull the lower chute crank straight out of the housing opening.
Safety note: Always power OFF and unplug the unit before removing the crank rod. |
| 24V-X2-SB18-MAX | Slide the upper chute crank through the rubber ring
– The rubber ring is mounted on the middle frame. Remove the hitch pin from the female end of the lower chute crank Insert the lower chute crank into the opening at the back of the housing
– Align the holes carefully. Secure the lower chute crank with the hitch pin
– Fully insert the hitch pin to lock it in place. Remove the second hitch pin from the lower chute crank Slide the upper chute crank down through the rubber ring Insert the upper chute crank into the lower chute crank Align the holes and secure with the hitch pin
– This locks the upper and lower crank rods together.
| Remove the hitch pin connecting the upper and lower chute crank rods Pull the upper chute crank upward and out Remove the hitch pin securing the lower chute crank to the housing Pull the lower chute crank out from the rear housing opening Slide the upper crank rod out of the rubber ring (if needed)
Always power OFF the unit and remove the batteries before removal. |
| SJ627E | Remove the hitch pin from the female end of the lower chute crank Insert the lower chute crank into the opening at the back of the housing
– Align the holes carefully. Secure the lower chute crank with the hitch pin Remove the second hitch pin from the lower chute crank Slide the upper chute crank through the rubber ring on the middle frame Insert the upper chute crank into the lower chute crank Align the holes and secure with the hitch pin
– This locks the crank rods together.
| Remove the hitch pin connecting the upper and lower chute crank rods Pull the upper chute crank upward and out of the lower crank Remove the hitch pin securing the lower chute crank to the housing Pull the lower chute crank out from the rear housing opening Slide the upper crank rod out of the rubber ring (if needed)
Always unplug the unit before removing the crank rod. |
| SJ623E | Remove the hitch pin from the female end of the lower chute crank Insert the lower chute crank into the opening at the back of the housing
– Align the holes. Secure the lower chute crank with the hitch pin Remove the second hitch pin from the lower chute crank Slide the upper chute crank through the rubber ring on the middle frame Insert the upper chute crank into the lower chute crank Align the holes and secure with the hitch pin
– This locks both crank rods together.
| Remove the hitch pin connecting the upper and lower crank rods Pull the upper crank rod upward and out Remove the hitch pin securing the lower chute crank to the housing Pull the lower chute crank out from the rear housing opening Slide the upper crank rod out of the rubber ring (if needed)
Always unplug the unit before removing the crank rod. |
| SJ626E | Remove the hitch pin from the lower chute crank Insert the lower chute crank into the opening at the rear of the housing
– Align the holes. Secure the lower chute crank with the hitch pin Slide the upper crank rod through the rubber ring on the middle frame Insert the upper crank rod into the lower chute crank Align the holes and secure with the hitch pin
– This locks both crank rods together.
| Remove the hitch pin connecting the upper and lower crank rods Pull the upper crank rod upward and out Remove the hitch pin securing the lower chute crank Pull the lower chute crank out from the rear housing Slide the upper crank rod out of the rubber ring (if needed)
Always unplug the unit before removing the crank rod. |
| 24V-X2-SB18-GO | Remove the hitch pin from the female end of the lower chute crank Insert the lower chute crank into the opening at the back of the snow blower housing. Align the holes in the crank rod with the holes in the housing Secure the lower chute crank using the hitch pin. Remove the second hitch pin from the lower chute crank Slide the upper chute crank through the rubber guide ring on the middle frame Insert the upper chute crank into the lower chute crank Align the holes on both crank sections and secure with the hitch pin
| Remove the upper hitch pin connecting the upper and lower chute crank rods. Pull the upper chute crank out of the lower chute crank and slide it back through the rubber ring. Remove the lower hitch pin securing the lower chute crank to the housing. Pull the lower chute crank straight out of the rear housing opening.
|