SDJ602LS
Manual Leaf Sweeper
22-Gal Collection Bag | 21" Cleaning Width
MEET THE SDJ602LS
Why It Stands Out
Manual Cleaning Power
Dual-Brush System
Powered by wheel motion, rotating brushes collect debris automatically — no cords, batteries, or fuel required.
Quiet & Eco-Friendly
Always ready to use with zero emissions, noise, or maintenance requirements.
21" Cleaning Width
Wide sweeping path covers more ground per pass for maximum efficiency.
Maximum Capacity & Comfort
22-Gallon Bag
Extra-large collection capacity reduces trips to empty during big cleanup jobs.
Only 13.9 lbs
Lightweight design makes it easy to push and maneuver for all users.
45° Ergonomic Handle
Natural pushing angle reduces strain during extended use.
Technical Specifications
| Feature | Specification |
|---|---|
| Cleaning Width | 21 inches |
| Collection Capacity | 22 gallons |
| Working Height | -2.8 in. to 10.6 in. |
| Handle Angle | 45° |
| Weight | ~13.9 lbs |
| Dimensions | 27.6" x 55.1" x 31.5" |
| Power Source | Manual (non-powered) |
| Best For | Leaf & debris collection |
| Warranty | 2 Years |
What's in the Box
- Sweeper body
- Handle
- Lower bar
- Middle bar
- Collection bag
- Screw knobs and bolts (x4)
- Screws (x4)
- Operator's manual
Who Is This Best For?
Homeowners clearing leaves & light debris from hard surfaces.
Users wanting cordless convenience without gas engine maintenance.
Perfect for driveways, patios, sidewalks – not thick grass.
Assembly
-
Step 1: Attach Base
Secure the base to the sweeper body using the provided screws.
-
Step 2: Attach Lower Bar
Attach the lower bar to the sweeper body using screw knobs and bolts.
-
Step 3: Attach Handle
Secure the handle to the lower bar using screw knobs and bolts.
-
Step 4: Install Collection Bag
Insert the support rod into the middle bar, then attach the collection bag to the unit.
Getting Started
- Push the sweeper forward — brushes rotate automatically as wheels move
- Adjust height setting based on surface type
- Best on hard, flat surfaces (driveways, patios, sidewalks)
- Empty bag when full: Release middle bar → Remove bag → Empty contents
Troubleshooting Guide
Possible Causes
- Brushes clogged
Solutions
- Clean debris from brushes
Possible Causes
- Incorrect height setting
Solutions
- Adjust working height
Possible Causes
- Bag not attached properly
Solutions
- Reinstall collection bag