SPX200-GO Electric Pressure Washer
2000 PSI Max | 13-Amp
Meet the SPX200-GO
Why It Stands Out
Compact Pressure Washing Power
2000 PSI Max
Delivers up to 2000 PSI max pressure for routine residential outdoor cleaning.
13-Amp Motor
Powered by a durable 13-amp electric motor for consistent cleaning performance.
Everyday Grime
Helps remove dirt, mud, mildew, grease, debris, and stubborn stains.
Versatile Cleaning Applications
Vehicles
Useful for cars, trucks, and gentle rinsing when paired with the correct nozzle.
Outdoor Surfaces
Great for patios, decks, driveways, sidewalks, fences, and siding.
Yard Items
Helpful for lawn equipment, outdoor furniture, and general outdoor cleanup.
Nozzles + Foam Cannon
4 Quick-Connect Nozzles
Includes 0°, 15°, 25°, and 40° nozzles for different cleaning needs.
Foam Cannon Included
Applies detergent foam for vehicles and outdoor surface treatment.
Total Stop System
Automatically shuts off the motor when the trigger is released to reduce wear.
Technical Specifications
| Specification | Details |
|---|---|
| Model Number | SPX200-GO |
| Motor | 13 A electric |
| Max Pressure | 2000 PSI Max* |
| Rated Pressure | 1500 PSI |
| Max Flow | 1.7 GPM |
| Rated Flow | 1.2 GPM |
| Hose Length | 20 ft |
| Power Cord | 35 ft GFCI protected |
| Maximum Water Temperature | 104°F |
| Detergent Tank | 13.53 fl oz |
| Weight | 17.6 lbs |
| Warranty | 2 Years |
What's in the Box
- Electric pressure washer
- Transport handle
- Trigger gun
- Stainless steel lance
- (4) Quick-Connect nozzles
- Detergent bottle / foam cannon
- High-pressure hose
- Trigger gun holder
- Hose holder
- Cord holder
- Needle clean-out tool
- Screws
- User manual
Assembly Overview
-
Position the pressure washer
Place the pressure washer upright on a stable surface close to the water supply.
-
Install holders
Slide the trigger gun holder, hose holder, and cord holder into place.
-
Attach handle
Slide the transport handle securely into position.
-
Store accessories
Install or store the hose, foam cannon, nozzles, and trigger gun.
-
Connect hose and lance
Connect the high-pressure hose, attach the stainless steel spray wand, and connect the garden hose.
Getting Started
-
Turn on the water supply
Fully open the water source before starting the unit.
-
Release air pressure
Press the trigger until water flow becomes steady.
-
Power on unit
Turn the power switch to ON.
-
Select proper nozzle
Choose a nozzle based on the cleaning task.
Quick Nozzle Guide
| Nozzle | Color | Best Use |
|---|---|---|
| 0° | Red | Spot cleaning / stubborn dirt |
| 15° | Yellow | Tough cleaning |
| 25° | Green | General cleaning |
| 40° | Gray | Gentle cleaning / vehicles |
Compatible Detergents
- SPX-HDC1G
- SPX-FCS1G
- SPX-APC1G
- SPX-ASST3Q
- Pressure Washer Graded Detergent
Maintenance & Storage
Water Inlet Filter Cleaning
Regularly remove the inlet filter and rinse it with warm water.
Nozzle Cleaning
Use the included needle clean-out tool to remove debris from nozzle openings.
Winter Storage Tips
- Disconnect all water connections
- Run the unit briefly to clear water
- Store indoors
- Avoid freezing temperatures
Troubleshooting Guide
Possible Causes
- Outlet or GFCI issue
- Power switch not turned on
- Power cord not securely connected
Solutions
- Reset the GFCI and verify the outlet.
- Confirm the power switch is ON.
- Check the plug and cord connection.
Possible Causes
- Air in the hose
- Clogged nozzle
- Restricted water inlet
- Low water supply
Solutions
- Bleed air by pressing the trigger until water flow is steady.
- Clean the nozzle with the included needle clean-out tool.
- Check the inlet filter and water source.
Possible Causes
- Dirty nozzle
- Dirty inlet filter
- Insufficient water flow
Solutions
- Clean the nozzle and inlet filter.
- Verify hose and water supply.
- Make sure the garden hose is not kinked.
Possible Causes
- Inadequate water supply
- Air trapped in the system
Solutions
- Verify hose and water flow.
- Release air by holding the trigger until flow becomes steady.
Possible Causes
- Soap bottle not seated properly
- Incorrect detergent type
- Detergent path blocked
Solutions
- Reinstall the detergent bottle.
- Use compatible pressure washer detergent only.
- Check and rinse the bottle connection.
Possible Causes
- Thermal sensor activated
- Motor needs time to cool
Solutions
- Turn the unit off and allow it to cool.
- Check for clogged nozzle or restricted water flow before restarting.