SPX100-GO Electric Pressure Washer
1800 PSI Max | 13-Amp
Meet the SPX100-GO
Why It Stands Out
Lightweight & Compact Design
14.33 lbs
Lightweight design makes the unit easier to transport, move, and store.
1800 PSI Max
Delivers up to 1800 PSI max pressure for everyday residential cleaning.
13-Amp Motor
Electric motor provides reliable cleaning power without gas or oil.
Versatile Outdoor Cleaning
Vehicles
Great for cars and trucks when paired with the proper nozzle and detergent.
Outdoor Surfaces
Useful for decks, patios, driveways, sidewalks, and house siding.
Outdoor Items
Helps clean outdoor furniture, lawn equipment, and everyday grime.
Nozzles + Foam Cannon
4 Quick-Connect Nozzles
Includes 0°, 15°, 25°, and 40° nozzles for different cleaning tasks.
Foam Cannon Included
Detergent foam cannon supports vehicle washing and outdoor surface treatment.
Total Stop System
Automatically shuts off the motor when trigger flow stops to reduce wear.
Technical Specifications
| Specification | Details |
|---|---|
| Model Number | SPX100-GO |
| Motor | 13 A electric |
| Max Pressure | 1800 PSI Max* |
| Rated Pressure | 1300 PSI |
| Max Flow | 1.7 GPM |
| Rated Flow | 1.2 GPM |
| Hose Length | 20 ft |
| Power Cord | 35 ft GFCI protected |
| Maximum Water Temperature | 104°F |
| Detergent Tank | 13.53 fl oz |
| Weight | 14.33 lbs |
| Warranty | 2 Years |
What's in the Box
- Electric pressure washer
- Transport handle
- Trigger gun
- Stainless steel lance
- (4) Quick-Connect nozzles
- Detergent bottle / foam cannon
- High-pressure hose
- Trigger gun holder
- Hose holder
- Cord holder
- Needle clean-out tool
- Screws
- User manual
Assembly Overview
-
Position the pressure washer
Place the pressure washer upright on a stable surface close to the water supply.
-
Install holders
Slide the trigger gun holder, hose holder, and cord holder into place.
-
Attach handle
Slide the transport handle securely into position.
-
Store accessories
Install or store the hose, foam cannon, nozzles, and trigger gun.
-
Connect hose and lance
Connect the high-pressure hose, attach the stainless steel spray wand, and connect the garden hose.
Getting Started
-
Turn on the water supply
Fully open the water source before starting the unit.
-
Release air pressure
Press the trigger until the water flow becomes steady.
-
Power on unit
Turn the power switch to ON.
-
Select proper nozzle
Choose a nozzle based on the cleaning task.
Quick Nozzle Guide
| Nozzle | Color | Best Use |
|---|---|---|
| 0° | Red | Spot cleaning / stubborn buildup |
| 15° | Yellow | Tough cleaning |
| 25° | Green | General-purpose cleaning |
| 40° | Gray | Gentle cleaning / vehicles |
Compatible Detergents
- SPX-HDC1G
- SPX-FCS1G
- SPX-APC1G
- SPX-ASST3Q
- Pressure Washer Graded Detergent
Maintenance & Storage
Water Inlet Filter Cleaning
Regularly remove the inlet filter and rinse it with warm water.
Nozzle Cleaning
Use the included needle clean-out tool to remove debris from nozzle openings.
Winter Storage Tips
- Disconnect all water connections
- Run the unit briefly to clear water
- Store indoors
- Avoid freezing temperatures
Troubleshooting Guide
Possible Causes
- Outlet or GFCI issue
- Power switch not turned on
- Power cord not securely connected
Solutions
- Reset the GFCI and verify the outlet.
- Confirm the power switch is ON.
- Check the plug and cord connection.
Possible Causes
- Dirty nozzle
- Low water flow
- Dirty inlet filter
Solutions
- Clean the nozzle and inlet filter.
- Check the water supply.
- Make sure the garden hose is not kinked.
Possible Causes
- Air trapped in the system
- Water supply restriction
Solutions
- Run trigger until steady flow.
- Verify hose and water supply.
Possible Causes
- Thermal sensor activated
- Motor needs time to cool
Solutions
- Turn the unit off and allow it to cool.
- Check for clogged nozzle or restricted water flow before restarting.
Possible Causes
- Loose hose connections
- Fittings not fully tightened
Solutions
- Tighten fittings.
- Check hose connections before restarting.
Possible Causes
- Soap bottle issue
- Incorrect nozzle setup
- Wrong detergent type used
Solutions
- Reinstall the detergent bottle.
- Use compatible pressure washer detergent only.
- Check the detergent connection.
Possible Cause
- Total Stop System operation
Solution
- This is normal when trigger flow stops.