Is the GFCI plug on your Sun Joe electric pressure washer damaged?
Replacing the GFCI plug may be possible without replacing the entire unit. However, the replacement must be compatible with your model and installed by a qualified professional.
Important: Stop Using a Damaged GFCI
If your GFCI plug has been damaged, stop using the pressure washer immediately.
Do not reconnect, reset, repair, or bypass the damaged GFCI plug.
To avoid electric shock, switch off the circuit breaker for the outlet before you touch or unplug the damaged GFCI plug.
Can the GFCI Plug Be Replaced?
Yes, in some cases. A damaged GFCI plug does not automatically mean the entire pressure washer needs replacement.
GFCI damaged? Do not use the pressure washer. Have the damage professionally evaluated before purchasing or installing a replacement. The affected outlet should also be inspected before reuse.
Replacement GFCI Requirements
When selecting a replacement GFCI plug for your Sun Joe pressure washer, verify the following specifications:
- 15 amps or higher at 120V — never below the amperage listed on your pressure washer.
- 3-prong, grounded design.
- Automatic-reset functionality, as specified for your model.
- UL- or ETL-listed for the intended application.
- Compatible wire gauge — verify the wire gauge printed on the existing cable jacket.
Note: Meeting these general specifications does not guarantee compatibility. A qualified professional should verify the replacement against your exact pressure washer model.
How to Find the Correct Replacement GFCI
-
Find Your Model Number
Locate the complete model number on your pressure washer's product label.
-
Check the Electrical Specifications
Record the voltage and amperage from the rating label. Note the wire gauge if it is visible.
-
Confirm GFCI Compatibility
Make sure the replacement meets the five requirements above and is suitable for your specific model.
Contact Shop Joe Customer Support if you need assistance identifying a compatible replacement. Availability may vary by model.
-
Have a Professional Install It
Have a qualified electrical repair professional inspect the unit, install the replacement, and verify safe operation before using the pressure washer again.
Still Under Warranty?
Contact Shop Joe Customer Support before arranging repairs. Unauthorized modifications may affect warranty coverage.
Learn more: What Does Your Warranty Cover?
Need More Help?
Need help identifying a replacement GFCI plug? Contact J.O.E.