X20-HHB-5A Cordless Handheld Turbo Blower Sun Joe® X20-HHB-5A Cordless Handheld Turbo Blower | Product Guide Grab, Blow, and Go. The Sun Joe® X20-HHB-5A Cordless Handheld Turbo Blower is a compact, one-hand cleanup tool powered by the 20V ECOSHARP® lithium-ion system. With the included 5.0 Ah battery, two nozzles, and up to 200 CFM of airflow, it helps clear leaves, dirt, dust, debris, pollen, grass clippings, sawdust, and light snow around the home, yard, garage, workshop, car, and patio. ⚡ 20V Max Battery Power🌬️ Round + Flat Nozzles🚫 No Gas, No Cords Meet the X20-HHB-5A Key Components 🔘 ON/OFF switch — one-button trigger-style control for starting and stopping the blower 🤲 Handle — main grip for one-hand operation and control 🔋 Battery compartment — holds the X20 Series ECOSHARP® battery pack 🌬️ Air inlet — draws air into the blower body and must stay clear for cooling 🧰 StormJet turbo blower body — compact motor housing for handheld cleanup 🎯 Round blower nozzle — lock-twist nozzle for focused airflow in tight spaces and corners 📣 Flat blower nozzle — wide nozzle for larger cleanup areas like leaves or light snow 🔌 20V lithium-ion charger — charges the included X20 ECOSHARP® battery 🟢 4-LED battery indicator — shows 25%, 50%, 75%, and 100% charge levels Technical Specifications Specification X20-HHB-5A Product Type Cordless handheld StormJet turbo blower Best Use Leaves, dirt, debris, pollen, grass clippings, sawdust, light snow, workbenches, keyboards, grills, gutters, garages, cars, patios, porches, and workshops Battery System X20 Series ECOSHARP® lithium-ion system Battery Voltage Max 20V DC max / 18V nominal under typical load Battery Capacity 5.0 Ah Motor 560W brushed motor Motor Speed 23,000 RPM Air Flow Max 200 CFM Runtime Up to 32 continuous minutes, per product page claim Operation One-button ON/OFF operation Battery Indicator 4-LED indicator: 25%, 50%, 75%, 100% Charger Input 100–240V AC, 50/60 Hz, 0.5A max Charger Output 21V DC, 750 mA Charge Time Max 6–8 hours Net Weight 3.42 lbs / 1.55 kg Gross Weight 3.79 lbs / 1.72 kg Warranty 2 Year Warranty 💡 Voltage note: Initial no-load voltage when fully charged peaks at 20V. Nominal voltage under typical load is 18V. What's in the Box Included Item X20-HHB-5A Cordless StormJet turbo blower body ✔ Round blower nozzle ✔ Flat blower nozzle ✔ X20 Series ECOSHARP® lithium-ion battery ✔ 5.0 Ah 20V lithium-ion charger ✔ Manual ✔ Assembly 🚫Do not insert the battery until assembly is complete. Make sure the switch is OFF, the battery is removed, and the impeller has fully stopped before attaching or detaching a nozzle. 1 Step 1 Choose the round nozzle or flat nozzle for the cleanup task. › 2 Step 2 Align the nozzle notches with the blower body slots. › 3 Step 3 Slide the nozzle onto the blower body. › 4 Step 4 Twist to lock until it clicks into place. ⚠️ Nozzle reminder: The manual does not recommend disassembling the blower tube after installation. Contact Shop Joe support or an authorized service center for repairs. Battery Charging Remove the battery Press the push lock button on the battery and pull the battery pack out of the blower. Connect the charger Confirm the charger voltage matches the outlet. Plug the charger adapter into an appropriate AC outlet, then connect the charger plug to the battery charge socket. Watch the charger light The charger indicator is red during charging and green when charging is complete. Unplug after charging A full charge takes approximately 6–8 hours. When the light turns green, unplug the charger from the outlet first, then disconnect it from the battery. 🔋 Battery care tip: Recharge the battery when you notice a drop in blower power. Never allow the battery pack to become fully discharged, as this can cause irreversible battery damage. Getting Started Install the nozzle Make sure the selected nozzle is attached, twisted, and clicked securely into place before using the blower. Check the battery level Use the 4-LED battery indicator to confirm the battery has enough charge for the task. Insert the battery Slide the battery into the battery compartment until it clicks and locks into position. Start the blower Press the ON/OFF switch all the way down to turn on the StormJet turbo blower. Use a controlled sweeping motion Hold the handle firmly with your dominant hand. Sweep side to side with the nozzle several inches above the ground or surface, keeping debris in front of you. Stop the blower Release the ON/OFF switch to turn off the device. Wait at least 5 seconds after stopping before restarting to help protect the DC motor. 🚫 Safe use reminder: Never point the blower nozzle toward people, pets, windows, cars, or loose debris that can ricochet. Do not use the blower to move anything burning or smoking, such as cigarettes, matches, or hot ashes. Operating Tips 1 Use the round nozzle for precision The round nozzle is best for focused airflow in tight spaces, crevices, corners, keyboards, grills, gutters, and car areas. 2 Use the flat nozzle for larger areas The flat nozzle is useful for quick cleanup across wider surfaces, including leaves, light debris, and light snow. 3 Wear protective gear Wear safety glasses or goggles, hearing protection, long pants, long sleeves, and proper footwear. Use a dust mask in dusty conditions. 4 Be considerate with noise Operate at reasonable hours and follow local ordinances. The manual lists usual recommendations of 9:00 AM to 5:00 PM, Monday through Saturday. Maintenance & Care 🚫Always remove the battery before cleaning, inspecting, storing, clearing jams, or performing maintenance. Wear protective gloves during maintenance and do not service the unit while the motor is running or hot. 1 Keep air vents clear Never cover the air vents. Keep them free from obstructions and debris so the motor can cool properly. 2 Remove dust and dirt regularly Clean the tool with a rag or brush. Do not allow water to come into contact with the tool. 3 Use mild cleaning only Do not use caustic agents or harsh cleaners on plastic parts. Use mild detergent on a damp cloth when needed. 4 Inspect before storage Check the blower for worn, loose, or damaged parts before storing. Contact support if repair or replacement is needed. 5 Remove the battery before storage Store the blower and battery separately in a dry, well-ventilated place that is inaccessible to children. 6 Store away from corrosive agents Keep the blower away from moisture, chemicals, and corrosive materials during storage. Troubleshooting Guide Remove the battery before inspecting, cleaning, clearing jams, or performing maintenance. Only perform the steps described below. 🔴 Unit Will Not Turn On Possible Cause Battery is not installed Battery is discharged Solution Reinstall the battery until it clicks into place Fully recharge the battery before use 🟡 Battery Will Not Charge Possible Cause Battery is too hot or too cold Solution Allow the battery to reach room temperature before charging If the battery is low on power, place it in a cool place for 30 minutes to 1 hour before charging 🟡 Weak Airflow Possible Causes Air inlet is blocked Battery is low Nozzle is not fully secured Solutions Turn off the unit and remove the battery Clear air vents and nozzle area Recharge the battery Confirm the nozzle is locked in place before restarting 🟡 Unit Shuts Off During Use Possible Causes Battery is depleted Battery or motor overheated Rapid start/stop cycling generated excess heat Solutions Recharge the battery Allow the unit to cool before restarting Wait at least 5 seconds after stopping before restarting 🟡 Short Runtime Possible Cause Battery is not fully charged Battery is cold Solution Fully charge the battery before use Warm the battery indoors to room temperature before operating 🔴 Excessive Vibration Possible Causes Debris is lodged near the fan or air inlet Internal component may be damaged Solutions Turn off the blower immediately Remove the battery Inspect the air inlet and nozzle area for debris Do not continue use if vibration remains; contact support Frequently Asked Questions What comes with the X20-HHB-5A? The X20-HHB-5A includes the cordless StormJet turbo blower body, round blower nozzle, flat blower nozzle, X20 Series ECOSHARP® lithium-ion battery, 20V lithium-ion charger, and manual. What is the difference between the round nozzle and flat nozzle? The round nozzle is best for focused airflow in tight spaces, corners, crevices, gutters, grills, keyboards, and car areas. The flat nozzle is designed for wider cleanup areas such as leaves, light debris, and light snow. How long does the battery take to charge? The included 5.0 Ah battery takes approximately 6–8 hours to fully charge. The charger light is red during charging and green when charging is complete. How do I check the battery charge level? Press the battery indicator button. The 4 LED lights show remaining charge: 1 light is 25%, 2 lights are 50%, 3 lights are 75%, and 4 lights are 100%. What can I use this blower for? This handheld blower is designed for everyday cleanup around the home, yard, garden, garage, car, workshop, patio, porch, gutters, grills, and workbench. It can help clear leaves, dirt, debris, pollen, grass clippings, sawdust, and light snow. What optional accessories are listed for this model? Optional accessories listed for the X20-HHB-5A include: X20-BATT-5A — 20V ECOSHARP® 5.0 Ah lithium-ion battery GC09-2100750US — charger for X20 Series SAW, CBLW, and BLOWER tools How should I store the blower? Remove the battery before storage. Store the blower, manual, and accessories in a secure, dry, well-ventilated place that is inaccessible to children and away from corrosive agents.