Aqua Joe Pool & Spa Chlorinating Tablets Keep Your Pool Crystal Clear. Whether maintaining an in-ground pool, above-ground pool, or spa, Aqua Joe® Pool & Spa Chlorinating Tablets provide a convenient way to help sanitize pool water and maintain available chlorine levels. Each tablet is individually wrapped and formulated with 90% available chlorine to help kill bacteria and control algae. Available in multiple bucket sizes, the Aqua Joe® chlorinating tablet family offers the same formula across all package sizes, allowing Customers to choose the quantity that best fits their maintenance needs. 🧊 3" Tablets💧 90% Available Chlorine🪣 25–50 lb Buckets Meet the Aqua Joe® Chlorinating Tablets Quick Comparison at a Glance Model Bucket Size AJ-TCCA90-025 25 lb AJ-TCCA90-035 35 lb AJ-TCCA90-040 40 lb AJ-TCCA90-050 50 lb 💡All four models use the same 3-inch individually wrapped chlorinating tablets. The main differences are the number of tablets and the bucket size. Product Overview 3-Inch Tablets Designed for pool and spa chlorination. Sanitizing Support Helps kill bacteria and control algae. Multiple Bucket Sizes Choose the size that best fits regular pool maintenance needs. Technical Specifications Feature Specification Product Family Aqua Joe® Pool & Spa Chlorinating Tablets Available Models AJ-TCCA90-025 / AJ-TCCA90-035 / AJ-TCCA90-040 / AJ-TCCA90-050 Tablet Size 3 inches Tablet Type Individually wrapped Available Chlorine 90% Active Ingredient Trichloro-s-Triazinetrione — 99.0% Other Ingredients 1.0% Total 100.0% Intended Use Pool & spa chlorination Warranty No warranty — consumable product Directions for Use 🚫 Before Use: Do not mix with any other chemicals. Do not add water to this product. Do not add this product to water in a pail. Follow all label instructions exactly. Water Balance Adjust pool pH to 7.2–7.6 as determined by a test kit. If the pool has not been previously stabilized, add conditioner and stabilizer, such as cyanuric acid, according to its product label. Stabilized Pools Add the recommended amount Add 1 tablet per 6,500 gallons of pool water per week or as needed. Maintain chlorine residual Maintain a chlorine residual of 1.0–1.5 ppm as determined by a test kit. Adjust based on conditions Dosage may vary depending on air temperature, water temperature, bather load, rain, thunderstorms, and pool exposure. Shock as needed Shock the pool weekly during hot weather and less frequently during cooler periods according to the instructions provided with the selected product. Confirm before swimming Pool water should not be entered until the chlorine residual is below 3.0 ppm. Application Methods 🛟 Floating Chlorinator Load the floating chlorinator with the prescribed dosage according to the chlorinator instructions. Allow the chlorinator to float freely. 🧺 Skimmer Method Empty the skimmer of all chemicals and debris, then place the prescribed dosage into the skimmer basket. ⚙️ In-Line Erosion Chlorinator Load the prescribed dosage into the chlorinator according to the chlorinator manufacturer's instructions. Additional Label Information Each tablet weighs approximately 200 grams, or 7 ounces. The tablets are on the acid side and may reduce pool pH and alkalinity. Maintain pool pH between 7.2 and 7.6 through periodic additions of sodium carbonate or sodium hydrogen carbonate if needed. Important Handling Notes ⚠️ DANGER: This product label displays the signal word “DANGER.” Always read and follow all label directions and safety precautions before use. Do not mix with other chemicals. Do not add water directly to the product. Do not add the product to water in a pail. Keep out of reach of children. Store according to the product label directions. Frequently Asked Questions Can these tablets be used with a floating chlorinator? Yes. The product label includes instructions for use with a floating chlorinator. Can these tablets be used in a skimmer? Yes. The product label includes directions for skimmer application. Can these tablets be used with an in-line erosion chlorinator? Yes. The product label includes instructions for use with an in-line erosion chlorinator. How much pool water does one tablet treat? The label states to use 1 tablet per 6,500 gallons of pool water per week or as needed, while maintaining the recommended chlorine residual. What chlorine level should be maintained? Maintain a chlorine residual of 1.0–1.5 ppm, as determined by a test kit. When can the pool be entered after treatment? The pool should not be entered until the chlorine residual is below 3.0 ppm. Related articles Auto Joe X20-AIR-2A Cordless Air Compressor