Proper storage helps protect Auto Joe inflators, batteries, chargers, accessories, and cleaning gel from heat, moisture, dirt, and accidental damage. Because storage requirements vary by product and power type, check the operator’s manual for your exact model before long-term storage.
indoors
clean and dry
extreme heat
from children
Products Covered
| Product Type | Power Type | Storage Focus |
|---|---|---|
| Auto Joe cordless rapid inflators | Removable lithium-ion battery | Tool, hose, adapters, battery, charger, and storage bag |
| Auto Joe hybrid inflator/deflators | AC and 12V DC | Power cords, hoses, adapters, and onboard compartments |
| Auto Joe multi-purpose cleaning gel | Not powered | Sealed container, temperature, sunlight, and contamination |
Before Storing Any Auto Joe Product
-
Turn the product off
Disconnect AC or 12V DC power. For cordless tools with a removable battery, remove the battery before storage.
-
Allow the unit to cool
Wait until the motor housing, inflator hose, and connectors have cooled completely.
-
Inspect and clean it
Remove loose dirt with a clean, dry or slightly damp soft cloth. Do not use gasoline, brake fluid, petroleum products, penetrating oils, alcohol, ammonia, or strong solvents on plastic parts.
-
Organize the accessories
Return each hose, cord, nozzle, needle, or adapter to its holder, compartment, case, or storage bag. Avoid sharp bends and pinching.
-
Choose a safe location
Store the product indoors in a clean, dry, secure location away from sunlight, heat, humidity, standing water, and children.
Store a Cordless Rapid Inflator
-
Secure the hose
Press the air hose into the storage area on top of the tool. Make sure it is fully seated without a sharp bend.
-
Return the adapters
Place the tapered adapter, sports-ball needle, and Presta valve adapter in their designated side holders.
-
Pack the tool
Place the inflator and its accessories in the supplied storage bag, if included, and keep the bag indoors in a clean, dry location.
-
Store the battery separately
Keep the lithium-ion battery in a cool, dry place. For extended storage, maintain at least a 40% charge and check it periodically to prevent deep discharge.
-
Store the charger
Unplug the charger, remove the battery, and store it indoors. Protect the cord from heat, oil, sharp edges, pinching, and crushing.
Store a Hybrid Inflator/Deflator
-
Set the selector to OFF
Place the AC/DC selector in the center OFF position and disconnect both power cords.
-
Return the AC cord
Place the AC cord in its compartment on the bottom of the unit.
-
Return the 12V DC cord
Place the 12V DC cord in its storage area on the right side of the unit.
-
Secure hoses and adapters
Return the high-pressure hose to the bottom storage area. Secure the high-volume hose and adapters in their designated holders.
-
Store the unit indoors
Keep it dry, clean, and protected from oil, grease, hot surfaces, and direct sunlight.
Store Auto Joe Cleaning Gel
-
Return it to the container
After use, place the gel back in its original container and close it securely.
-
Keep it cool and dry
Store the sealed container between 41°F and 80°F (5°C and 27°C), away from direct sunlight and high-temperature items.
-
Keep it secure
Store the gel out of the reach of children. The product is not for consumption.
-
Discard used-up gel
Dispose of the gel when it becomes saturated with dirt or dust or shows discoloration.
Quick Storage Reference
| Item | Recommended Storage | Important Reminder |
|---|---|---|
| 24V cordless inflator | Dry indoor location, 41°F–105°F (5°C–40.5°C) | Remove the battery before storage. |
| Lithium-ion battery | Cool, dry place; approximately 77°F (25°C) | Maintain at least 40% charge; protect terminals from metal objects. |
| Battery charger | Dry indoor location, unplugged | Do not leave a battery connected for days or store it in a hot vehicle. |
| Hybrid AC/DC inflator | Dry indoor location away from heat and sunlight | Set selector to OFF and return cords and hoses to their compartments. |
| Cleaning gel | Sealed in a cool, dry place, 41°F–80°F (5°C–27°C) | Keep away from sunlight, heat, and children. |
Storage Do’s and Don’ts
Do
- Store products indoors in a clean, dry location.
- Let inflators cool before placing them in a bag or compartment.
- Secure hoses and cords loosely without sharp bends.
- Use the supplied bag, case, holders, and compartments.
- Check stored batteries periodically and recharge before deep discharge.
Don’t
- Do not store equipment where children can access it.
- Do not expose products to rain, humidity, or standing water.
- Do not leave batteries or chargers in direct sunlight or a hot vehicle.
- Do not place loose metal objects near battery terminals.
- Do not store or use a damaged, swollen, leaking, or overheated battery.
Frequently Asked Questions
Can I leave my Auto Joe inflator in the car?
Avoid long-term vehicle storage. Parked vehicles can exceed the safe storage temperature for batteries, chargers, and plastic parts. Store the product indoors in a cool, dry location whenever possible.
Should I remove the battery before storing a cordless inflator?
Yes. Switch the tool off, remove the battery, and store the tool, battery, and charger in suitable dry locations.
How much charge should a stored battery have?
Maintain at least a 40% charge during extended storage. Check the charge periodically so the battery does not become fully discharged.
Can I store a battery in freezing temperatures?
No. Protect lithium-ion batteries from freezing and follow the storage-temperature limits in the manual for your exact battery.
Where should I store inflator adapters?
Use the built-in adapter holders or supplied storage bag to help prevent loss, contamination, and damage.
How should I store Auto Joe cleaning gel?
Seal it in its container and keep it in a cool, dry place between 41°F and 80°F (5°C and 27°C), away from direct sunlight and children.
What should I do if a stored battery is damaged or swollen?
Do not charge or use it. Keep it away from heat, flammable materials, children, and metal objects, then contact Shop Joe Customer Support for safe handling and disposal guidance.