Clear snow and ice from cars and trucks with the Snow Joe SJBLZD Series. Choose the original 18-inch snow broom, a jumbo 19-inch model, a convenient 2-pack, or the LED-equipped 4-in-1 model for nighttime use.
Meet the SJBLZD Series
All models combine a vehicle-safe polyethylene foam head with a built-in hard-plastic ice scraper and an auto-locking telescoping pole. Jumbo models add a wider, deeper foam head and XL scraper. The LED model also works as a flashlight and emergency blinker.
Choose Your Model
| Model | Configuration | Head | Color | Special Feature |
|---|---|---|---|---|
| SJBLZD | 1-pack, 2-in-1 | 18 in. | Blue | Original snow broom + scraper |
| SJBLZD-2 | 2-pack, 2-in-1 | 18 in. | Blue | Two original snow brooms |
| SJBLZD-JMB2-SJB | 2-pack, 2-in-1 | 19 × 9 × 1.5 in. | Blue | Jumbo head + XL scraper |
| SJBLZD-JMB-PRP2 | 2-pack, 2-in-1 | 19 × 9 × 1.5 in. | Purple | Jumbo head + XL scraper |
| SJBLZD-JMB-GRY2 | 2-pack, 2-in-1 | 19 × 9 × 1.5 in. | Gray | Jumbo head + XL scraper |
| SJBLZD-LED-BLK | 1-pack, 4-in-1 | 18 × 7 in. | Black | Four LEDs + emergency blinker |
Why It Stands Out
Vehicle-safe foam
The durable, reinforced, non-abrasive polyethylene foam head moves heavy, wet snow without damaging paint, trim, or glass.
Extended reach
The auto-locking pole adjusts from 33 to 52 inches for easier access across a vehicle.
Built-in scraper
Turn the tool around to clear windshield ice with the hard-plastic scraper; jumbo models use an XL scraper.
Nighttime visibility
SJBLZD-LED-BLK adds four LED lights, a flashlight function, and an emergency blinker.
Technical Specifications
| Specification | Original Models | Jumbo Models | LED Model |
|---|---|---|---|
| Models | SJBLZD; SJBLZD-2 | SJBLZD-JMB2-SJB; SJBLZD-JMB-PRP2; SJBLZD-JMB-GRY2 | SJBLZD-LED-BLK |
| Pack Quantity | 1 or 2 | 2 | 1 |
| Functions | Snow broom + ice scraper | Jumbo snow broom + XL ice scraper | Snow broom + ice scraper + flashlight + emergency blinker |
| Foam Head | 18 in. wide | 19 × 9 × 1.5 in. (483 × 230 × 37 mm) | 18 × 7 in. |
| Handle Length | 33–52 in. (84–132 cm) | ||
| Blade Material | Polyethylene foam | ||
| Scraper Material | Hard plastic | ||
| Weight per Tool | 1.4 lb | 1.5 lb | 1.7 lb |
| Battery | Not required | Not required | 2 AAA batteries required; not included |
| Warranty | 2-year manufacturer's warranty | ||
Shared Specifications
Applies to all models listed.
Original Models
SJBLZD; SJBLZD-2
Jumbo Models
SJBLZD-JMB2-SJB; SJBLZD-JMB-PRP2; SJBLZD-JMB-GRY2
LED Model
SJBLZD-LED-BLK
What’s in the Box
- SJBLZD: 1 telescoping snow broom with non-abrasive foam head and built-in ice scraper
- SJBLZD-2: 2 telescoping snow brooms with non-abrasive foam heads and built-in ice scrapers
- Jumbo 2-pack models: 2 jumbo telescoping snow brooms with 19-inch foam heads and built-in XL ice scrapers
- SJBLZD-LED-BLK: 1 lighted telescoping snow broom with non-abrasive foam head, built-in ice scraper, and bracket holder; 2 AAA batteries are not included
Assembly
- Align the foam head and pole. Position the foam-head connector with the end of the telescoping pole.
- Join the parts. Press the connector and pole together until the head is securely attached.
- Check the connection. Gently pull on the foam head before use to confirm it is firmly seated.
- Install batteries on SJBLZD-LED-BLK. Insert two AAA batteries in the LED compartment, matching the polarity marks. Batteries are not included.
Getting Started
- Clear loose snow first. Use the foam head to push snow from the roof, hood, trunk, and windshield.
- Adjust the reach. Extend the auto-locking pole only as far as needed, up to 52 inches, and confirm it holds before sweeping.
- Use controlled strokes. Guide snow away without striking mirrors, trim, lights, or accessories.
- Clear windshield ice. Turn the tool around and use the hard-plastic scraper on the windshield.
- Use the lights when needed. On SJBLZD-LED-BLK, select the steady light for illumination or the blinking mode for emergency visibility.
Maintenance, Care & Storage
- Remove snow and ice from the foam head, scraper, and pole after each use.
- Allow the tool to dry before storage to help keep the telescoping sections moving freely.
- Inspect the foam head, scraper, connection, and pole before use. Stop using the tool if a part is cracked, loose, or damaged.
- Retract the pole and store the tool securely in the vehicle trunk.
- For SJBLZD-LED-BLK, remove the AAA batteries before long-term storage and keep the battery compartment dry.
Troubleshooting
The telescoping pole does not stay extended
Solution: Retract the pole, extend it again to the desired length, and confirm the auto-locking section holds before use.
The foam head feels loose
Solution: Stop using the tool. Press the connector firmly into place and check it again. Do not use the broom if the head remains loose or damaged.
The LED lights do not turn on (SJBLZD-LED-BLK)
Solution: Confirm that two AAA batteries are installed in the correct direction. Replace depleted batteries and make sure the battery compartment is dry and fully closed.
Frequently Asked Questions
Which model do I have?
Check the model number on the product or packaging. Use the “Choose Your Model” table above to match the SKU, pack quantity, color, head size, and features.
Will the foam head scratch my vehicle?
The reinforced polyethylene foam head is non-abrasive and designed to move snow without damaging paint, trim, or glass.
What is the difference between the original and jumbo models?
Original models have an 18-inch foam head and weigh 1.4 lb per tool. Jumbo models have a 19 × 9 × 1.5-inch foam head, an XL scraper, and weigh 1.5 lb per tool.
How far does the pole extend?
Every model listed in this guide adjusts from 33 to 52 inches (84 to 132 cm).
Which models include two snow brooms?
SJBLZD-2, SJBLZD-JMB2-SJB, SJBLZD-JMB-PRP2, and SJBLZD-JMB-GRY2 are 2-packs.
Which model has lights?
SJBLZD-LED-BLK is the 4-in-1 model with four LED lights, a flashlight function, and an emergency blinker. It requires two AAA batteries, which are not included.
Do the other SJBLZD models require batteries?
No. Only SJBLZD-LED-BLK requires batteries. The original and jumbo models are fully manual.